Mã sản phẩm: RG-CS85-24GT8XS-D
Highlight Features
Rich port types, 24 x 10/100/1000BASE-T ports, and 8 x 1GE/10GE SFP+ ports for uplink
Hardware redundancy, guaranteed service continuity and network connectivity
VSU virtualization, flexible networking and high reliability.
Layer 3 routing control, adaptive to multiple services, efficient and guaranteed data transmission
Network security policies, real-time monitoring, CPP and NFPP, delivering enhanced network robustness
SNMP, RMON, Syslog, USB log backup features, CLI, Eweb, telnet and other management modes, easy network maintenance
Hardware Specifications
| Port Specifications | RG-CS85-24GT8XS-D | RG-CS85-24SFP/8GT8XS-D | RG-CS85-48GT4XS-D | RG-CS85-48SFP4XS-D | RG-CS85-48GT4XS-HPD |
| Fixed service port | 24 x 10/100/1000BASE-T ports
8 x 1GE/10GE SFP+ ports |
24 x 1GE SFP ports
● Ports 1 to 16 support the rate of 100Mbps, ports 17 to 24 do not support the rate of 100Mbps ● Ports 1 to 8 are 10/100/1000BASE-T combo ports 8 x 1GE/10GE SFP+ ports |
48 x 10/100/1000BASE-T ports
4 x 1GE/10GE SFP+ ports |
48 x 1GE SFP ports
4 x 1GE/10GE SFP+ ports |
48 x 10/100/1000BASE-T ports, supporting PoE/PoE+
4 x 1GE/10GE SFP+ ports |
| Module slot | 1 x expansion module slot
2 x power module slots |
1 x expansion module slot
2 x power module slots |
1 x expansion module slot
2 x power module slots |
1 x expansion module slot
2 x power module slots 3 x fan module slots |
1 x expansion module slot
2 x power module slots 2 x fan module slots |
| Expansion module | CM85-4XS2CQ | ||||
| Power module | RG-PA150IB-F | RG-PA150IB-F | RG-PA150IB-F | RG-PA150IB-F | RG-PA600I-P-F
RG-PA1000I-P-F |
| Fan module | / | / | / | M2SFAN I-F (pre-installed 3) | M2SFAN I-F (pre-installed 2) |
| Module service port | CM85-4XS2CQ:
● 4 x 1GE/10GE SFP+ ports ● 2 x 40GE/100GE QSFP28 ports |
||||
| Fixed management port | 1 x RJ45 console port
1 x RJ45 MGMT port |
||||
| USB | 1 x USB 3.0 port | ||||
| System Specifications | RG-CS85-24GT8XS-D | RG-CS85-24SFP/8GT8XS-D | RG-CS85-48GT4XS-D | RG-CS85-48SFP4XS-D | RG-CS85-48GT4XS-HPD |
| Packet forwarding rate | 512 Mpps | 512 Mpps | 488 Mpps | 488 Mpps | 488 Mpps |
| Switching capacity | 688 Gbps | 688 Gbps | 656 Gbps | 656 Gbps | 656 Gbps |
| CPU | Dual-core CPU, each core with the clock speed of 1.2 GHz | ||||
| Real-time clock (RTC) | Supported | Supported | Supported | Supported | Supported |
| BootROM | 16 MB (2 flash chips for 1+1 boot redundancy) | ||||
| Flash Memory | 4 GB | ||||
| Memory | 1 GB | 1 GB | 1 GB | 2 GB | 2 GB |
| Switch buffer | 4 MB | ||||
| MAC address table size | 64,000 | ||||
| ARP table size | 24,000 | ||||
| Number of IPv4 unicast routes | 24,000 | ||||
| Number of IPv4 multicast routes | 4,000 | ||||
| Number of IPv6 unicast routes | 14,000 | ||||
| Number of IPv6 multicast routes | 2,000 | ||||
| Number of ACEs | Ingress: 7,000
Egress:1,500 |
||||
| Number of VSU members | 4 | ||||
| Dimensions and Weight | RG-CS85-24GT8XS-D | RG-CS85-24SFP/8GT8XS-D | RG-CS85-48GT4XS-D | RG-CS85-48SFP4XS-D | RG-CS85-48GT4XS-HPD | ||
| Unit dimensions
(W x D x H) |
440 mm x 340 mm x 44 mm
(17.32 in. x 13.39 in. x 1.73 in.) |
442 mm x 420 mm x 43.6 mm (17.40 in. x 16.54 in. x 1.72 in.) | |||||
| Shipping dimensions
(W x D x H) |
593 mm x 497 mm x 192 mm
(23.35 in. x 14.57 in. x 7.56 in.) |
563 mm x 563 x mm 210 mm
(22.17 in. x 22.17 in. x 8.27 in.) |
|||||
| Rack height | 1 RU | ||||||
| Unit weight | 4.4 kg
(9.70 lbs) |
4.3 kg
(9.48 lbs) |
4.5 kg
(9.92 lbs) |
5.3 kg
(11.68 lbs) |
5.7 kg
(12.57 lbs) |
||
| Shipping weight | 6.20 kg
(13.67 lbs) |
6.62 kg
(14.59 lbs) |
6.30 kg
(13.89 lbs) |
7.70 kg
(16.98 lbs) |
7.80 kg
(17.20 lbs) |
||
| Power Supply and Consumption | RG-CS85-24GT8XS-D | RG-CS85-24SFP/8GT8XS-D | RG-CS85-48GT4XS-D | RG-CS85-48SFP4XS-D |
| Power supply | 2 x pluggable power modules | |||
| Power module redundancy | 1+1 power redundancy | |||
| Power module hot swapping | Supported | |||
| Power input | RG-PA150IB-F (AC input):
● Rated input voltage: 100 V AC to 240 V AC, 50 Hz to 60 Hz ● Maximum input voltage: 90 V AC to 264 V AC, 47 Hz to 63 Hz ● Maximum input current: 3 A |
|||
| Maximum output power | RG-PA150IB-F: 150 W | |||
| Maximum power consumption | 60 W (excluding expansion modules)
85 W (including expansion modules) |
77 W (excluding expansion modules)
102 W (including expansion modules) |
70 W (excluding expansion modules)
95 W (including expansion modules) |
105W (excluding expansion modules)
125W (including expansion modules) |
| Power Supply and Consumption | RG-CS85-48GT4XS-HPD |
| Power supply | 2 x pluggable power modules |
| Power module redundancy | 1+1 power redundancy |
| Power input | RG-PA600I-P-F (AC input):
● Rated input voltage: 100 V AC to 240 V AC, 50 Hz to 60 Hz ● Maximum input voltage: 90 V AC to 264 V AC, 47 Hz to 63 Hz ● Maximum input current: 10 A RG-PA1000I-P-F (AC input 1): ● Rated input voltage: 100 V AC to 130 V AC, 50 Hz to 60 Hz ● Maximum input voltage: 90 V AC to 143 V AC, 47 Hz to 63 Hz ● Maximum input current: 12 A RG-PA1000I-P-F (AC input 2): ● Rated input voltage: 200 V AC to 240 V AC, 50 Hz to 60 Hz ● Maximum input voltage: 180 V AC to 264 V AC, 47 Hz to 63 Hz ● Maximum input current: 8 A |
| Maximum output power | RG-PA600I-P-F: 600 W
RG-PA1000I-P-F: ● 100 V AC to 130 V AC: 930 W ● 200 V AC to 240 V AC: 1000 W |
| Maximum power consumption | 120 W (without PoE)
1,600 W (full PoE load) |
| PoE port | All RJ45 ports support PoE/PoE+ (IEEE802.3af/at) power supply |
| PoE power cable pairs | Mode A (1-2, 3-6 pairs) |
| PoE output power | Each PoE port provides up to 30 W of power, with a maximum power of 1440 W over 48 ports (30 W x 48).
The maximum power depends on the configured power supply ● 1 x RG-PA600I-P-F: 370 W ● 2 x RG-PA600I-P-F: 740 W ● 1 x RG-PA1000I-P-F: 740 W ● 2 x RG-PA1000I-P-F: 1480 W, a maximum output of 1440 W over 48 ports (30 W x 48) Note: The maximum number of powered devices supported by the switch is determined by the available power of the switch and the actual power consumption of each device. |
| Energy saving | Supported |
| Environment and Reliability | RG-CS85-24GT8XS-D | RG-CS85-24SFP/8GT8XS-D | RG-CS85-48GT4XS-D | RG-CS85-48SFP4XS-D | RG-CS85-48GT4XS-HPD |
| Temperature | Operating temperature: 0°C to 45°C (32°F to 113°F)
Storage temperature: –40°C to +70°C (–40°F to +158°F) |
||||
| Humidity | Operating humidity: 10% to 90% RH (non-condensing)
Storage humidity: 5% to 95% RH (non-condensing) |
||||
| Altitude | Operating altitude: 0 m to 5,000 m (0 ft. to 16,404.20 ft.)
Storage altitude: 0 m to 5,000 m (0 ft. to 16,404.20 ft.) |
||||
| Mean time between failure (MTBF) | 1,051,000 hours (about 120 years) | 823,000 hours (about 94 years) | 963,000 hours (about 110 years) | 788,000 hours (about 90 years) | 832,000 hours (about 95 years) |
| Fan | 3 x fixed fan modules | 3 x fixed fan modules | 3 x fixed fan modules | 3 x pluggable fan modules (pre-installed) | 2 x pluggable fan modules (pre-installed) |
| Heat dissipation | Fan cooling, left-to-right airflow | Fan cooling, left-to-right airflow | Fan cooling, left-to-right airflow | Fan cooling, front-to-rear airflow | Fan cooling, front-to-rear airflow |
| Acoustic noise | 45°C (113°F): 56.2 dB | 45°C (113°F): 56.2 dB | 45°C (113°F): 57.9 dB | 45°C (113°F): 56.2 dB | 45°C (113°F): 57.9 dB |
| Power module hot swapping | Supported | ||||
| USB hot swapping | Supported | ||||
| Cable hot swapping | Supported | ||||
| Power supply monitoring | Monitoring of power supply model and status
Power supply failure alarming |
||||
| Fan monitoring | Fan speed adjustment: 3 levels
Fan failure alarming |
||||
| Temperature monitoring | Temperature monitoring, over-temperature alarming | ||||
| ESD | ESD Contact/Air Discharge: 6kV/8kV
ESD Susceptibility Contact/Air Discharge: 8 kV/15kV |
||||
| Surge protection | MGMT port: 4 kV
Service port: 10 kV Power port: common mode 6 kV, differential mode 6 kV |
||||
| Conformal coating | Protects circuits against moisture, salt spray, mold, electrical shock and leakage, and so on | ||||
| Certifications and Regulatory Compliance | RG-CS85-24GT8XS-D | RG-CS85-24SFP/8GT8XS-D | RG-CS85-48GT4XS-D | RG-CS85-48SFP4XS-D | RG-CS85-48GT4XS-HPD |
| Safety regulation | IEC 62368-1 | ||||
| EMC regulation | EN 300386, EN 55032 Class A, EN 55035,
EN IEC 61000-3-2, EN 61000-3-3, EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 61000-4-11 |
||||
Software Specifications
| RG-CS85 Series | |
| Feature | Description |
| Ethernet switching | Jumbo frame (maximum length: 9,216 bytes) |
| IEEE 802.1Q (supporting 4K VLANs) | |
| Voice VLAN | |
| Super VLAN, Private VLAN | |
| MAC VLAN, Port based VLAN, Protocol based VLAN, IP-Subnet based VLAN | |
| GVRP | |
| Basic QinQ
Flexible QinQ |
|
| STP, RSTP, and MSTP | |
| ERPS (G.8032) | |
| LLDP/LLDP-MED | |
| LACP (IEEE 802.3ad) | |
| IP service | ARP |
| DHCP client, DHCP relay, and DHCP server | |
| DHCP snooping | |
| DNS | |
| DHCPv6 client and DHCPv6 relay | |
| DHCPv6 snooping | |
| Neighbor Discovery (ND) and ND snooping | |
| IP routing | Static routing |
| RIP and RIPng | |
| OSPFv2, OSPFv3, IS-ISv4, ISv4, and IS-ISv6 | |
| BGP4 and BGP4+ | |
| IPv4 and IPv6 VRF | |
| IPv4 and IPv6 PBR | |
| Multicast | IGMP v1/v2/v3, and IGMP proxy |
| IGMP v1/v2/v3 snooping | |
| PIM-DM, PIM-SM, and PIM-SSM | |
| MSDP | |
| MLD v1/v2 | |
| MLD snooping v1/v2 | |
| PIM-SMv6 and PIM-SSM v6 | |
| MPLS | MPLS L3VPN |
| ACL and QoS | Standard IP ACLs
Extended IP ACLs Extended MAC ACLs Time-based ACLs Expert-level ACLs ACL80 IPv6 ACL |
| ACL redirection | |
| Port traffic rate limiting | |
| Congestion management: RR, SP, WRR, DRR, WFQ, SP+WRR, SP+DRR, and SP+WFQ | |
| Congestion avoidance: tail drop, RED, and WRED | |
| 802.1p/DSCP/ToS traffic classification
Eight priority queues per port |
|
| Security | Multiple AAA modes |
| RADIUS and TACACS+ | |
| Port-based and MAC-based 802.1x authentication | |
| Web authentication | |
| HTTPS | |
| SSHv1, SSHv2 | |
| Global IP-MAC binding | |
| Port isolation and port security | |
| IP source guard | |
| SAVI | |
| CPP and NFPP | |
| Strict and loose RPF
uRPF ignoring default routes |
|
| Reliability | REUP, RLDP, DLDP |
| IPv4 VRRP v2/v3 and IPv6 VRRP | |
| BFD | |
| Link tracing, fault notification, and remote loopback based on 802.3ah (EFM) | |
| Hot swapping of power modules and cables | |
| 3-level fan speed adjustment
Fan fault alarm |
|
| Device virtualization | Virtual Switching Unit (VSU) |
| NMS and maintenance | SPAN, RSPAN, and ERSPAN |
| sFLOW | |
| NTP and SNTP | |
| FTP and TFTP | |
| SNMP v1/v2/v3 | |
| RMON (1, 2, 3, 9) | |
| NETCONF | |
| CWMP (TR-069) standard protocol | |
| gRPC | |
| Cloud and SON | |
| PoE | IEEE 802.3af and 802.3at
Uninterruptible power supply upon hot start Port priority |
| Mã sản phẩm | RG-CS85-24GT8XS-D |
|---|---|
